Out of Stock
Food & Beverage

OTO350 Engine Oil Analyzer – Rapid Condition Test of Gasoline and Diesel Engine Oil, Mineral & Synthetic Modes, Result in About 15 Seconds

Brand: Generic
Out of Stock

The OTO350 engine oil analyzer gives a quick condition check of gasoline or diesel engine oil. Place 3–5 drops in the sensor bowl and the result appears as a percentage in about 15 seconds, with Mineral and Synthetic modes, user calibration and a 3.7V 1000mAh rechargeable battery.

OTO350 Engine Oil Analyzer

The OTO350 is an engine oil analyzer designed to test gasoline or diesel engine oil. After choosing the oil mode (Mineral or Synthetic), the user places 3–5 drops of oil in the bowl over the sensor, and the result appears on the 128*64 LED display in approximately 15 seconds.

The tester reacts primarily to the increase in acidity that occurs as oil degrades, while contaminants such as dirt, soot, water, antifreeze and metal particles also influence the reading. Because engine oil additives affect the result, engine oil dealers and manufacturers can calibrate the instrument themselves for each kind of oil, using an old oil that has reached its change limit and a new oil of the same kind.

Reading the result: 0–10 % new oil or oil newly changed; 10–20 % excellent / good oil quality; 20–30 % fair oil quality; 30–40 % oil change recommended; above 40 % immediate oil change and engine check recommended.

Key Features

  • Tests gasoline and diesel engine oil
  • Separate Mineral and Synthetic oil modes
  • Small sample: 3–5 drops of oil
  • Result in approximately 15 seconds
  • User calibration for a specific kind of engine oil
  • 128*64 LED display
  • 3.7V Li rechargeable battery, 1000mAh, charged with the power adaptor; the charging light turns from red to green when full
  • Auto power off after 5 minutes without a button press
  • For indoor use; oil sample and instrument should both be between 10 °C and 27 °C (hot oil must not be tested)

Product Specifications

ModelOTO350
ApplicationGasoline or diesel engine oil
Oil ModesMineral / Synthetic
Measuring PrincipleResponds primarily to the increase in oil acidity; contaminants also influence the reading
Test ResultOil condition in %: 0–10 % new oil; 10–20 % excellent / good; 20–30 % fair; 30–40 % oil change recommended; > 40 % immediate oil change / engine check recommended
Sample3–5 drops of oil
Test TimeApprox. 15 s
Display128*64 LED display
CalibrationUser calibration with old and new oil of the same kind
Power Supply3.7V Li rechargeable battery, 1000mAh
ChargingPower adaptor; charging light turns from red to green when full
Auto Power OffAfter 5 minutes without a button press
Operating Temperature10 °C to 27 °C
Relative Humidity< 80 %
UseIndoor use only
Dimensions145 × 85 × 20 mm

Write a Review

Your email address will not published. Required fieled are marked

Your Review:

Files to download

Related Products

Other related products explored by visitors

Easy Test whatsapp
Cart :
Subtotal
$480

The maximum purchase for this product is () pieces.

| Compare List ()